NETGEAR GS752TP User Manual

Managing Device Security
160
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
4. To confirm the password, enter it again to make sure that you entered it correctly.
This field displays asterisks (*)
5. Click APPLY
to apply the new settings to the system.
Configuration changes take effect immediately.
 To reset the password for the management interface:
1. Select the Reset Password check box to reset the password to the default value.
2. Click APPL
Y
to apply the new settings to the system.
Configuration changes take effect immediately.
Note: In the case of a lost password, press the Factory Default Reset
button on the front panel for more than two seconds to restore the
factory default. The reset button only reboots the device.
Configure RADIUS Settings
RADIUS servers provide authentication, authorization, and accounting services for networks.
The RADIUS server maintains a user database, which contains per-user authentication
information. The switch passes information to the configured RADIUS server, which can
authenticate a user name and password before authorizing use of the network. RADIUS
servers provide a centralized authentication method for:
• W
eb access
• Access control port (802.1x)
The RADIUS menu contains links to features described in the following sections:
• Global Configuration
• RADIUS Server Configuration
• Accounting Server Configuration
Global Configuration
Use the RADIUS Configuration screen to add information about one or more RADIUS
servers on the network.
 To configure global RADIUS server settings:
1. Select Security
 Management Security  RADIUS  Global Configuration.

NETGEAR GS752TP Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Number of multicast groups filtered	1024
Fiber optic connector	SFP
SFP module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
10G support	-
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x
Copper ethernet cabling technology	1000BASE-T, 100BASE-T, 10BASE-T
DHCP features	DHCP client
MAC address table	8000 entries
Packet buffer memory	8 MB
Number of static routes	32
Supported network protocols	IPv4, IPv6, TFTP, SNTP, TACACS+
Power consumption (typical)	384 W
Safety	CE, CSA, UL
Product color	Gray
Electromagnetic compatibility	CE, FCC, Class A EN 55022, Class A C-Tick, EN 50082-1, EN 55024, CCC
Mean time between failures (MTBF)	220447 h
Heat dissipation	1750.70 BTU/h
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Total Power over Ethernet (PoE) budget	15.4 W
Power over Ethernet plus (PoE+) ports quantity	8
Cables included	AC

Weight and Dimensions

Depth	316 mm
Width	440 mm
Height	43 mm
Weight	5100 g