NETGEAR GS752TP User Manual

Configure Quality of Service
141
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2. Select the type of interface for CoS settings to be configured:
To configure CoS settings for a physical port, link aggregation group (LAG), or both, click
PORTS, LAGS or ALL, respectively.
3. Select the check box next to the interface to configure.
You can select multiple ports and LAGs to apply the same setting to the selected
interfaces.
The Interface
Trust Mode field displays whether the selected interfaces trust a particular
packet marking when the packet enters the port. The data for all the ports is taken from
the Global T
rust Mode.
• Untrusted. Do not trust any CoS packet marking at ingress.
• 802.1p or DSCP. Apply the global trust mode set in the CoS configuration.
4. In the Interface Shaping Rate field, specify the maximum bandwidth allowed.
This specification is typically used to shape the outbound transmission rate in this range
of 64–1000000 Kbps.
The shaping rate (Kb) value is the value of the interface shaping
rate configured. The default value is 0.
The value 0 means that the maximum is unlimited.
5. In the Interface Ingress Rate Limit field, specify the ingress rate allowed.
The range is 100–1000000 Kbps. The default value is 0, which means that the maximum
is unlimited.
6. Click APPLY to apply the changes to the system.

NETGEAR GS752TP Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Number of multicast groups filtered	1024
Fiber optic connector	SFP
SFP module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
10G support	-
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x
Copper ethernet cabling technology	1000BASE-T, 100BASE-T, 10BASE-T
DHCP features	DHCP client
MAC address table	8000 entries
Packet buffer memory	8 MB
Number of static routes	32
Supported network protocols	IPv4, IPv6, TFTP, SNTP, TACACS+
Power consumption (typical)	384 W
Safety	CE, CSA, UL
Product color	Gray
Electromagnetic compatibility	CE, FCC, Class A EN 55022, Class A C-Tick, EN 50082-1, EN 55024, CCC
Mean time between failures (MTBF)	220447 h
Heat dissipation	1750.70 BTU/h
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Total Power over Ethernet (PoE) budget	15.4 W
Power over Ethernet plus (PoE+) ports quantity	8
Cables included	AC

Weight and Dimensions

Depth	316 mm
Width	440 mm
Height	43 mm
Weight	5100 g