EasyManua.ls Logo

NETGEAR GS752TP - Page 251

NETGEAR GS752TP
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hardware Specifications and Default Values
251
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Password control access 1 Idle time-out = 5 minutes
Password = password
Management security 1 profile with 20 rules for
HTTP/HTTPS/SNMP access to
allow/deny an IP address/subnet
All IP addresses allowed
Port MAC lock down All ports Disabled
Boot code update 1 N/A
DHCP/manual IP 1 DHCP enabled/192.168.1.1
Default gateway 1 192.168.0.254
System name configuration 1 NULL
Configuration save/restore 1 N/A
Firmware upgrade 1 N/A
Factory default reset 1 (web and front-panel button) N/A
Dual image support 1 Enabled
Factory reset 1 N/A
Multi-session web connections 5 Enabled
SNMPv1/V2c
SNMP v3
Max. 5 community entries Enabled (read, read-write
communities)
Time control 1 (Local or SNTP) Local Time enabled
LLDP/LLDP-MED All ports Disabled
Logging 3 (buffered server traps) Buffer Log enabled
MIB Support 1 Enabled
Smart Control Center N/A Enabled
Statistics N/A N/A
IGMP snooping v1/v2/v3 All ports Disabled
Configurations upload/download 1 N/A
EAPoL flooding All ports Disabled
BPDU flooding All ports Disabled
Multicast groups 1K Disabled
Filter Multicast control 1 Disabled
Number of static routes 32 N/A
Number of routed VLANs 15
N/A
Feature Sets Supported Default

Table of Contents

Related product manuals