EasyManuals Logo

NETGEAR WiFi 6 AX1800 User Manual

NETGEAR WiFi 6 AX1800
249 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
106), the page displays the detected download and upload speeds for the AP and
the automatically assigned priority.
The following tables describe the fields on the Attached Devices page.
DescriptionField
If access control is enabled (see Enable and manage network access control on page
86), the access control status of the device in the network (Allowed or Blocked).
Status
If QoS is enabled (see Enable QoS and automatically set the Internet bandwidth on
page 105 or Enable QoS and manually set the Internet bandwidth on page 106), the
priority that the AP assigned automatically to the device or that you changed manually
(see Step 5 or see Change the priority for a connected device [router mode] on page
111).
Priority
For WiFi devices, the connection type information shows the radio and WiFi network
(Wireless 1, Wireless 2, or Wireless 3) to which the device is connected.
For LAN devices, the connection type is always Wired.
Connection Type
The device name, if detected. This field also displays the device model, if detected,
and device type icon. This information is for display only.
You can change the information that displays (see Step 5).
Device Name,
including device
model and device type
icon
The IP address that is assigned to the device when it joined the AP network. This
address can change when a device is disconnected and rejoins the network.
Note: If you enable access control or QoS, the IP address is displayed in the Device
Name field.
IP Address
If QoS is enabled (see Enable QoS and automatically set the Internet bandwidth on
page 105 or Enable QoS and manually set the Internet bandwidth on page 106), the
download speed in Mbps that the device uses.
Internet Download
Speed by Device
If QoS is enabled (see Enable QoS and automatically set the Internet bandwidth on
page 105 or Enable QoS and manually set the Internet bandwidth on page 106), the
unload speed in Mbps that the device uses.
Internet Upload Speed
by Device
The following information displays only if the AP is in router mode and supports VPN
clients devices.
DescriptionField
VPN Client Devices
The device name, if detected.Device Name
User Manual159Maintain and Monitor
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WiFi 6 AX1800 and is the answer not in the manual?

NETGEAR WiFi 6 AX1800 Specifications

General IconGeneral
WiFi TechnologyWiFi 6 (802.11ax)
Maximum WiFi Speed1.8Gbps
BandsDual-band
Ethernet Ports1 x Gigabit Ethernet
MU-MIMOYes
BeamformingYes
SecurityWPA3
OFDMAYes
Wireless Speed600 Mbps (2.4 GHz) + 1200 Mbps (5 GHz)
AntennaInternal antennas
Power SourcePower adapter

Related product manuals