DVR Server Manual
5.2.1 Connection Operations
Press will connect the DVR Server’s camera video from
and press will disconnect all connections. If DVR
Server’s channel is more than channels that you selected partition mode, you
can use button to display DVR Server’s video in sequence. Pressing
button will switch full screen mode and Right-Single-Click image can back
to normal mode.
5.2.2 Connection/Record Status
This icon indicates the current connection and their record status:
Gray: Not connected;
Navy blue: Connected with no recording;
Green: Connected with recording.
You can change the record status by pressing corresponding number
110
To Next Page
Loading...