Netvision DVR system - Server Setup

DVR Server Manual
time will be consistent with DVR server computer.
After setup is finished, click this button to save the setup.
Exit setup.
Remote setup for NV Series IP camera or DVS includes Server, Channel,
PTZ, Sensor and Alarm.
3.2 Server Setup
Press button to set server parameters remotely:
In the server window, some blanks’ background are gray. Those
parameters are read from foreside server, you can’t modify them. Other blanks
whose background is white, you can set them remotely.
【Server Name】Enter the name description for easy identification. The
name delegates the foreside server. If use DNS to get IP, the name will be
used.
【IP configuration and related】
【Server IP】
These are network configurations; you can set
LAN or Internet IP according to your need.
【Listen Port】
【Subnet Mask】
【Net Gate】
【Net Cable Type】
【Connection configuration and related parameter】
83