DVR Server Manual
2. Video Sequence
Press button to switch among all cameras in current windows in
sequence when current partition number is less than total channels .You can
press again to cancel the switch. But at first, you must confirm that
Camera Sequencing Interval in system setup has been set enable.
3. Emergency Recording Button
Press button to trigger recording of all cameras for 30 seconds even
if they have been set to record in any other modes. This function is useful in
dealing with emergency where quick response is required.
4. Image Capture
Press button to save a still image of a selected camera to local hard
disk for reviewing or printing. It will ask you for file name and save path when
you use or to capture pictures for the first time. Next time, it will
save to the previous path directly.
5. Manual Record Switch
Press button to record manually and press it again to stop manual
recording for the selected camera.
6. Information Display Panel
29
To Next Page
Loading...