Netvision DVR system - Sensor Setup; Group Setup

DVR Server Manual
2.3 Sensor Setup
2.3.1 Sensor Setup
【Select Sensor】Select the sensor from the drop-down list in order to set
the parameters of it.
【Sensor】Select this sensor port to use or not.
【Sensor Position】Enter the description for easy identification.
【Activate PTZ Preset】Select linkage of Speed Dome preset number.
Speed Dome will move to this preset number automatically when there is an
alarm. (Speed Dome installation needed).
【Play Alarm sound】Select a sound of .wav for a sensor, if there is an
alarm, the sound file will be played.
【Link to PTZ】Select a camera that is related to this sensor alarm.
【DO Port】Select a DO port that is related to this sensor alarm. You can
set sensor alarm for single sinsor via the Sensor and DO Port here.
【DO Port Name】Fill in the description for the DO port.
2.3.2 Group Setup
Sensor group setup is very similar to the group setup of camera recording.
【Selected Group】Select group number. You can set sensor alarm for a
group here.
65