DVR Server Manual
After selected the camera to play user can click button to show all
the files of this camera.
By default, system will play back video file from the first one. In this screen
you can change the file you want to play by double clicking it directly.
The camera list below the window shows the recorded data of the day you
select. Double click any time with record data, a red mark will be there. Then
use to enlarge the time bar, so that you can select an exact time you
want to playback.
When there are too much record data, you can use
to
select.
Press or to view the record data of other cameras.
The red bar means the exact time when system is playing back now.
Note:
It is not suggested that multi-channel (more than 10 channels) record and
playback coinstantaneous unless your PC has a wonderful configuration,
because the data throughput of HDD is huge. Multi-channel search in client
and server are the same except their paths. In client there are local and LAN
search. In LAN search, it searches among the record data in the local network
96
To Next Page
Loading...