10-92
- Close the ink door.
- NOTE: It takes about 20 seconds for the printer to register the ink. A Printer Ready
message will appear in the lower left corner of the Operator Panel.
Callisto Ink must be purchased from NeuraLabel or a NeuraLabel supplier. Only NeuraLabel ink
that has been designed to work with the Callisto printhead will work in the Callisto printer.
Running out of Media during the print
If media runs out during a print the printer will allow the user to continue the job. The last label
may need to be reprinted. Follow the prompts on the Operator Panel to continue printing.
To Next Page
Loading...
Need help?
General