9-80
Figure 9-14. Web Server: Clean Printhead
Calibrate Printer Manual allows execution of Die Leveling and Die Alignment routines. These
workflows were discussed earlier in this chapter in the Maintenance Quality Toolbox section.
Print Jobs
Several useful features are available in the Printer Web Server related to print jobs.
Send Job to Printer will send any valid Callisto print file to the printer for immediate printing.
Send Job to Held Jobs will send any valid Callisto print file to Held Jobs to be stored on the
printer. Be sure to use only valid Callisto printer files. These files normally have a .prn file
extension. A Callisto print file can be created by printing directly to a file port, or Neuralog
support might send a test file to print on the printer.
To send a file directly to the printer for immediate printing, select Send Print File to Printer.
Browse for the file on your computer or local network by selecting the Choose File button.
Select the Upload button to send the file to the printer.
To send a file to Held Jobs to be stored on the printer, select Send Print File to Held Jobs.
Browse for the file on your computer or local network by selecting the Choose File button.
Select the Upload button to send the file to the printer’s Held Jobs. From Held Jobs the file can
be printed at any time.
To Next Page
Loading...
Need help?
General