3-13
Figure 3-11. Service Tray Installation
Instructional videos can also be found on the Neuralog web site for removing and installing a
service tray.
Label Media
The Callisto can use a variety of media including papers and synthetics. Matte, satin and glossy
finishes are supported. Many specialty materials such as transparent or BS5609-rated
materials are supported. Media should be high quality and inkjet coated. Both die-cut and
unconverted media can work in the Callisto printer.
Die-cut media must have gaps between the individual labels or it may have registration marks.
Do not use die-cut media if the labels are pealing away from the backing even before the media
enters the printer. Using poor quality media such as this may damage the printhead and void
the warranty.
NeuraLabel can supply both unconverted and die-cut media. Our sales engineers are happy to
work with Callisto customers to determine the most appropriate media choice for each
individual application. Some Callisto customers have pre-purchased media inventory that they
wish to “use up.” NeuraLabel sales engineers will make every effort to work with individual
customers wishing to use pre-owned media. However, no guarantees can be made about
media not specifically designed for use in the Callisto printer.
.
To Next Page
Loading...
Need help?
General