4-15
4. Setting up the Network
The Callisto printer is a network printer and connects to your local network. By default it will
use a dynamically assigned IPV4 Address. A static address may be assigned or IPV6 may be
used. Once detected, the network address will be displayed in the lower right section of the
printer display. The Callisto printer will also attach and print directly to your PC via a network
cable. If you need to print over USB, USB-to-network adapter cables have been found to work
well for this kind of printing.
The Callisto printer has a Host Name that can be used to access it over the network. By default,
the Host Name will be set to the printer’s serial number, however the Host Name may be
changed by the end user. Accessing the printer via Hostname is convenient when using
dynamic addressing since the network address can change.
To access the printer’s Host Name from the Operator Panel:
- Touch the Settings icon.
- Go to Settings->Device Settings->Networking->Host Name.
- Edit the Host Name if needed and touch Apply.
Figure 4-1. Host Name View
To Next Page
Loading...
Need help?
General