4-16
To assign an IPV4 dynamic network address simply plug in the network cable.
To assign a static network address do the following on the printer Operator Panel.
- Touch the Settings Icon
- Select Device Settings->Networking->IPV4 Settings.
- Select the Manual choice and enter the corresponding data for your network.
- Touch the Apply button.
Figure 4-2. IPV4 Settings View
To use IPV6, either dynamic or static, do the following.
- Touch the Settings icon.
- Select Device Settings->Networking->IPV6 Settings.
- Enter the IPV6 settings for your network.
- Touch the Apply button.
To Next Page
Loading...