8-56
TIP: Touch the number keyin to directly edit the number in the popup. An on-screen
keypad will appear.
- Select Set in the popup to see the number update in the die leveling grid.
- Select Apply to temporarily apply the values, and then select Quick Print to review the
results on the printed test pattern.
- Repeat the process as needed. Once you are satisfied with the results, touch the Save
button to permanently save your changes to the printer.
Figure 8-25. Die Leveling for Wide Bands
Notice the More… button. The following additional options are available.
- Refresh View – Refresh the view, in case the values have been changed elsewhere, i.e.
the printer web server view.
- Reset – Reset the values to all zeroes.
- Factory Defaults – Reset the values to the original values set at the factory.
To Next Page
Loading...
Need help?
General