NF ZM2371 - Page 183

5.6 Command Explanation
5-56 ZM2371/ZM2372
[:SENSe]:CORRection:CKIT:STANdard1:FORMat {GB|CPG}
[:SENSe]:CORRection:CKIT:STANdard1:FORMat?
Description: Sets/queries the format of OPEN correction value.
Parameters: GB G,B (conductance G and susceptance B of parallel equivalent
circuit)
CPG Cp,G (C and G of parallel equivalent circuit)
Setting example: :CORR:CKIT:STAN1:FORM GB
Sets the format of OPEN correction value to G,B.
Response: {GB|CPG}
Query example: :CORR:CKIT:STAN1:FORM?
Response example: GB
The format of OPEN correction value is G,B.
[:SENSe]:CORRection:CKIT:STANdard2:FORMat {RX|LSRS}
[:SENSe]:CORRection:CKIT:STANdard2:FORMat?
Description: Sets/queries the format of SHORT correction value.
Parameters: RX Rs,X (resistance R and reactance X of series equivalent circuit)
LSRS Ls,Rs (inductance L and R of series equivalent circuit)
Setting example: :CORR:CKIT:STAN2:FORM RX
Sets the format of SHORT correction value to Rs,X.
Response: {RX|LSRS}
Query example: :CORR:CKIT:STAN2:FORM?
Response example: RX
The format of SHORT correction value is Rs,X.