Nice HySecurity SlideSmart HD - Clock Battery Replacement

To install the two new batteries, reverse the
removal procedure.
1. Connect the red wire to the red terminal on the
left battery and slide the battery onto the tray.
2. Attach the blue wire to the black terminal.
3. Insert the second 8Ah battery and connect the
blue wire to the red terminal).
4. As you slide the battery onto the tray, connect
the black wire to the black terminal on the right
battery. See Figure 77.
Figure 77. New DC Battery Replacement
RED
WIRE
WIRE
TIES
8Ah
BATTERIES
BLACK
WIRE
BLUE
WIRE
CLOCK BATTERY REPLACEMENT
A lithium coin battery supports the clock so the
date and time is retained even when the main
power is turned off. Replace the battery about
every ve years (or as needed) with a DL 2025, DL
2032, or CR 2025, or CR 2032 battery. See Figure
78.
Figure 78. Clock Battery Replacement
DU
A
L
G
ATE
COM
B
A
U
SER
2
COM
N
O
D
C
USER 1
Lithium
baery
MAINTENANCE
SlideSmart HD Programming and Operations
110110
support.hysecurity.com