Nice HySecurity SlideSmart HD - Vehicle Detector Installation Options

SMART DC CONTROLLER
VEHICLE DETECTOR INSTALLATION
OPTIONS
The Smart DC Controller provides a feature-rich
interface to four different vehicle detector inputs.
HySecurity’s custom Hy5B mini-detector module
(Figure 52) plugs directly into the Smart DC
Controller board making eld installation much
faster plus providing a large performance benet.
The detector communicates with the Smart DC
Controller microprocessor to achieve the following
benets over common box type detectors:
NOTICE
Standard box type 11 pin (24 Volt DC or 24 Volt
AC) vehicle detectors may be connected in the
traditional manner as described in Installing
Standard 11-Pin Box Type Vehicle Detectors.
z Loop frequency is automatically set and
monitored by the Smart DC Controller
z Very low power draw, which is important for
maximum UPS capability during a power failure
and for solar applications.
z Cross-talk between multiple loops is impossible.
z Best operating frequency for each loop is
automatically selected.
z Loop frequency and call strength can be
reported on the Smart DC Controller display.
z Loop malfunctions are reported and stored by
the Smart DC Controller.
z Most detector or loop faults that can occur
are reported and presented on the Smart DC
Controller display.
It is not mandatory to use two separate detectors
for inner and outer obstruction detection, but the
benets inusing an additional detector provide
second vehicle tailgating detection, loitering alert,
and selectable nonreversing options.
Figure 52. Hy5B Front and Rear Module
LED
Terminal Ground: Lightning protection
Optional connection:
Use where lightning strikes occur.
Vehicle Loop
features and
functions
explained
on front label
Metal Pins fit
into controller
board socket
FRONT VIEW REAR VIEW
STANDOFF SUPPORTS
(INSERT INTO THE HOLES
IN THE CONTROL BOX)
SlideSmart HD Programming and Operations
6868
support.hysecurity.com