Troubleshooting Reference
Manual # 42-02-1P28 A3 5-47
Table 5.9 HC-MPU-2-TS Connector Assignments
Connector Assignment Description
J6 SD MICRO Port for SD card storage.
J3 CAN, Modular Typically connects to HC-CHP. See Job Prints
M1 Ethernet Ethernet port. Web App configuration/per job use. Only available on -M. See
Job Prints
J7 USB USB Drive port
J5 CPU B TJAG MCE use only
J4 CAN H CAN external network connection, High
J4 CAN L CAN external network connection, Low
J4 SHLD CAN external network connection, Shield
J9, MCE 16V1 Power input, Not needed for most applications. See Job Prints.
J9, MCE 16V2 Power input, Not needed for most applications. See Job Prints
J10 Expansion MCE use only
J2 CPU A PROG MCE use only
To Next Page
Loading...
