The Computer
5-6 Manual # 42-02-1P28 A3
Figure 5.5 Menu Tree
Shortcuts
• Touch the elevator on the Home screen to go to Call Registration.
• Touch the upper left corner on the Register Calls screen to return to the Home screen.
• Touch inside the Mode of Operation, Faults & Safety, or System Status areas of the Home
screen to go to a screen relevant to obtaining additional information.
• Touch the home icon in upper left corner to return to the Home screen.
HOME
CONFIG 01
CONFIG 02
UTILS
SYSTEM IO
SYSTEM
DIAG
CAR DIAG MOTION
DIAG
GROUP
DIAG
PLD DIAG
ACTION
INFO
STATUS
INFO
STATS
SCOPE
Building Setup
Job Info and Labels
Elevator Features
Configure Spare Inputs
System Timers
Configure Spare Outputs
Hoistway Setup
Door Operation
NTS Switches
ETS Switches
S-Curve
System Control Parameters
CONFIG 03
Building Security
Emergency Power
Recall Switches
Network Settings
CFSS
Additional Features
Motion Flags
Motion Numeric
Motion Inputs
Motion Outputs
Car Calls Canceled...
Hall Calls Canceled...
Door Open...
Door Close...
Prohibit Run / Start...
Group to Car Data
Car to Group Data
PLD Flags
PLD Numeric
PLD Inputs
PLD Outputs
CPU Bus Com
Monitoring Tools
CAN Bus Viewer
Version Information
Other Car Settings
Address Diagnostics
Maintenance
Hourly
Hall Bus Inventory
View Scope
Landing System
System Inputs
Programmed Inputs
System Outputs
Programmed Outputs
Car Op. Flags
Car Op. Numeric
Emerg Pwr & Earthquake
Door Dwell Times
Itinerary Manager
Features Diagnostics
Event Log
Door Control
Diagnostics Tree
Landing System
Active Events
System Inputs
System Outputs
Progammed Inputs
Programmed Outputs
Front CPI I/O Status
Rear CPI I/O Status
File Transfer
Register Calls
Construct and Bypass Faults
Safety Tests
Date and Time
Landing System Utilities
To Next Page
Loading...
Need help?
General
