The Computer
5-4 Manual # 42-02-1P28 A3
Using the Touch Screen
Motion 2000 TS controls use a touchscreen user interface (OBD). The initial (and default) dis-
play is the Home Display. Screens are arranged in order of use with the Home screen first,
followed by configuration screens, utility screens, and then diagnostics oriented screens.
Home
Figure 5.2 Home Display Screen (OBD)
On the Home display screen, tabs to the right of the window show what additional adjustment,
control, and diagnostic screens are available. Up and Down arrows scroll through the tabs. To
access a screen, simply touch the associated tab.
• When activated, main screens with many selections open to a sub-screen selection menu.
• To select/set a particular feature, simply touch it.
• If Yes/No, it will change from one state to the other.
• If there are more than two possible settings, a list will appear.
• If a time or value may be set, a numeric entry screen will open.
• The Save button allows you to save changes. (Save and Exit.)
• The Exit button allows you to exit the screen. Any unsaved changes will be ignored.
• Undo: Undo action but remain in menu.
We recommend you take a few minutes to become familiar with the touch screen interface. You
will find that operation is simple and predictable. See additional screen representations on the
next page.
Screen freeze: If the screen should ever freeze or lock up, press RSTA on the HC-MPU-2-TS
board.
The controller must be on Inspection to modify and save parameters.
Scrolling control
highlighted if additional parameters/
selections are available in this direction
Menu Tabs
highlighted when selected
To Next Page
Loading...
