103
3 Adjust settings.
The maximum value for auto ISO
sensitivity can be selected using
Maximum sensitivity (note that if the
ISO sensitivity selected by the user is
higher than that chosen for
Maximum sensitivity, the value
selected by the user will be used instead).
In modes P and A,
sensitivity will only be adjusted if underexposure would
result at the shutter speed selected for Minimum shutter
speed (
1
/
4000–30 s, or Auto; in modes S and M, ISO sensitivity
will be adjusted for optimal exposure at the shutter speed
selected by the user).
If Auto is selected, the camera will
choose the minimum shutter speed based on the focal
length of the lens.
Press J to exit when settings are
complete.
ISO AUTO is displayed when On is
selected.
When sensitivity is altered
from the value selected by the user,
these indicators flash and the altered
value is shown in the control panel.
A Live View
In live view, the auto ISO sensitivity control indicator is displayed in the
monitor.
To Next Page
Loading...
