167
Indices
If Index marking is selected as the
“Press” option for Custom Setting g1
(Assign Fn button, 0 288), g2 (Assign
preview button, 0 288), or g3 (Assign
AE-L/AF-L button, 0 288), you can press
the selected button during recording to
add indices that can be used to locate
frames during editing and playback
(0 178; note that indices can not be
added in i mode).
Up to 20 indices can
be added to each movie.
A See Also
Frame size, frame rate, microphone sensitivity, card slot, and ISO
sensitivity options are available in the movie shooting menu (0 273).
The roles played by the J, Fn, Pv, and A AE-L/AF-L buttons can be chosen
using Custom Settings f1 (OK button; 0 284), g1 (Assign Fn button;
0 288), g2 (Assign preview button; 0 288), and g3 (Assign AE-L/
AF-L button, 0 288), respectively (the last three options also allow
you to lock exposure without having to keep a button pressed).
Custom Setting g4 (Assign shutter button; 0 288) controls whether
the shutter-release button can be used to start live view or to start and
end movie recording.
To Next Page
Loading...
