Nikon D7200 - Exposure Compensation (Live View)

110
At values other than ±0.0, the 0 at the
center of the exposure indicators will
flash (modes P, S, A, SCENE, and %) and a
E icon will be displayed in the control
panel and viewfinder after you release
the E button.
The current value for
exposure compensation can be
confirmed in the exposure indicator by pressing the E button.
Normal exposure can be restored by setting exposure
compensation to ±0. Except in SCENE and % modes, exposure
compensation is not reset when the camera is turned off (in
SCENE and % modes, exposure compensation will be reset when
another mode is selected or the camera is turned off).
A Mode M
In mode M, exposure compensation affects only the exposure
indicator; shutter speed and aperture do not change.
A Exposure Compensation (Live View)
When the live view selector is rotated to C, exposure compensation
can be set to values between –5 and +5 EV, but only values between
–3 and +3 can be previewed in the monitor.
A See Also
For information on choosing the size of the increments available for
exposure compensation, see Custom Setting b2 (EV steps for
exposure cntrl, 0 278).
For information on making adjustments to
exposure compensation without pressing the E button, see Custom
Setting b3 (Easy exposure compensation, 0 278).
For information
on restricting the effects of exposure compensation to the background
when using a flash for foreground lighting, see Custom Setting e4
(Exposure comp. for flash, 0 283).
For information on automatically
varying exposure, flash level, white balance, or Active D-Lighting, see
page 197.