215
❚❚ Interrupting Multiple Exposures
To interrupt a multiple exposure before the specified number of
exposures have been taken, select Off for multiple exposure
mode.
If shooting ends before the specified number of
exposures have been taken, a multiple exposure will be created
from the exposures that have been recorded to that point.
If
Auto gain is on, gain will be adjusted to reflect the number of
exposures actually recorded.
Note that shooting will end
automatically if:
• A two-button reset is performed (0 194)
• The camera is turned off
• The battery is exhausted
• Pictures are deleted
To Next Page
Loading...
