Nokia 7705 - Page 329

Quality of Service Guide Service Egress and Ingress QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 329
sap-ingress
Syntax sap-ingress [policy-id] [association | match-criteria | detail]
Context show>qos
Description This command displays service ingress QoS policy information.
Parameters policy-id — displays information about the specific policy
Values 1 to 65535, or policy-name (up to 64 characters)
Default all service ingress policies
association — displays policy associations
match-criteria — displays match criteria
detail — displays detailed policy information including policy associations
Output The following output is an example of service ingress QoS policy information, and Table 48
describes the fields.
Output Example
A:ALU-1# show qos sap-ingress
===============================================================================
Sap Ingress Policies
===============================================================================
Policy-Id Scope Name Description
-------------------------------------------------------------------------------
1 Template default Default SAP ingress QoS policy.
100 Template Used on VPN SAP
===============================================================================
Number of Policies : 2
===============================================================================
*A:ALU-1#
A:ALU-1# show qos sap-ingress 1 detail
Associations Service Name - the name of the service
Service-Id - the unique service ID number that identifies the
service in the service domain
Customer-Id - the customer ID that identifies the customer to the
service
SAP - the Service Access Point within the service where the
policy is applied
Table 47 SAP Egress Command Output (Continued)
Label Description