Simple SIP DECT configuration 147
— Threshold/Time
— Alarm reaction time
2 In Performance Settings, under Performance Counters
Configuration fill the field in Interval UPM generation every
_____ minutes or accept the default of 1440 minutes, which
equals one day.
This interval specifies how often User Performance
Measurement files are generated.
3 Fill n the field in Interval EPM generation every _____ minutes
or accept the default of 15 minutes.
This interval specifies how often Equipment Performance
Measurement files are generated.
4 Fill in the field next to Start measurement at: with the time you
want performance measurement to start each day.
5 Fill in the field next to Stop measurement at: with the time you
want performance measurement to stop each day.
6 Under Create performance counters every, select the check
boxes under the days of the week you want performance counter
retrieval to take place.
7 In the field Keep Performance data for _____ days fill in the
number of days you want the performance data stored on the
hard disk.
8 Click More >> to access Advanced Email Settings.
9 In Advanced Email Settings, fill in the field next to SMTP
Server with the DNS name or the IP address of your SMTP mail
server.
Note: With Advanced Email Settings, emails can be sent
automatically if a DAP fails or if the channel occupation
threshold is exceeded for more than a specified number
of seconds. Automatic emails can be sent only if the DAP
controller or manager is running, and the PCR service is
running on the DAP controller or manager PC.
If you enter the DNS name of your SMTP Server, ensure that
the DNS server address is configured for the network connection
on the DAP Controller.
10 Select the Send alarm emails check box , which enables SIP
DECT to send emails to the SMTP Server.
11 Fill the field next to Email addresses: with one or more
destination email addresses.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.