Simple SIP DECT configuration 159
Procedure 66
Creating ESN Control Block
Step Action
1 On the ESN page, select Customer X > Network Control &
Service > ESN Access Code & Parameters (ESN).
The ESN Access Codes and the Basic Parameters page
appears.
2 Enter 10 for MXDM/MXRL/MXIX/MXFC/MXFS/MXLC/MXSC, 9
for AC1, 6 for ERDT, 0 for MXSD.
3 Click Submit.
--End--
Adding digit manipulation block
To add digit manipulation block using Element manager, follow the steps in
the next procedure.
Procedure 67
Adding digit manipulation block
Step Action
1 On the ESN page, select Customer X > Network Control &
Service > Digit Manipulation Block (DGT).
2 Select Digit Manipulation Block index 1, or next available
index, and click Add.
3 Click Submit.
--End--
Adding route list block
To add a route list block using Element manager, follow the steps in the
next procedure.
Procedure 68
Adding route list block
Step Action
1 On the ESN page, select Customer X > Network Control &
Service > Route List Block (RLB).
2 Enter 1 for route list index and click Add.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
