NUANCE OMNIFORM 3 User Manual

Using Form Assistant
Form Usage #
The Form Assistant Options
This section gives a brief description of each option in Form Assistant.
Through a series of dialog boxes, the Form Assistant easily steps you
through the process of converting your form into an electronic form.
Scan a Form or Image File
Select
Scan a form or image file
to scan a paper form or import an image
file and to determine how you will work with the form in OmniForm.
Fill in a Form
Select
Fill in a form
to fill the currently open form or to open a form and
fill it. See Chapter 6, Filling a Form, for more information.
Print a Form
Select
Print a form
to print the currently open form or to open a form and
print it.
Search a Form for Information
Select
Search a form for information
to search the currently open form for
information or to open a form and search it.
Work on a Form’s Design
Select
Work on a form’s design
to redesign the currently open form or to
open a form in design view. See Chapter 5, Designing a Form, for more
information.
Create a New, Blank Form
Select
Create a new, blank form
to open a blank page in design view.
Setting the Form Assistant Startup Option
You can enable or disable Form Assistant at startup. You can deselect
the
Show on StartUp
on the Form Assistant dialog box and click
Close>
.
OmniForm will open a blank form the next time you launch it.
Or, if you want the Form Assistant dialog box to show each time you
launch OmniForm, then make sure that the
Show on StartUp
on the Form
Assistant dialog box is selected.

NUANCE OMNIFORM 3 Specifications

General

Brand	NUANCE
Model	OMNIFORM 3
Category	Software
Language	English