NUANCE OMNIFORM 3 - Sending Objects Front or Back

Redesigning Your Form
Designing a Form 41
•Select
Center Horizontally
to align the selected objects by their
horizontal centers.
•Select
To p
to align all selected objects by their top edges.
•Select
Bottom
to align all selected objects by their bottom edg-
es.
•Select
Center Vertically
to align the selected objects by their
vertical center.
The objects align according to the chosen command.
Sending Objects Front or Back
You can use the
Bring to Front
or
Send to Back
commands in the Format
menu to layer overlapping objects.
Choose
Bring to Front
to move one or more selected objects in front of all
objects on a form.
Choose
Send to Back
to move one or more selected objects behind all
objects on a form.
Horizontal centers’
alignment midpoint
Horizontal centers
Vertical centers’ align-
ment midpoint
Vertical centers