Printing a Form
OmniForm Procedures 9
3 Select an option in the
Data
drop-down list.
This option is only available if
Form and Data
or
Data Only
is
selected in the
Form/Data
drop-down list.
•Select
Current Record Only
to print just the current record.
•Select
Current Record
Set
to print the current found set of
records.
•Select
All Records
to print every record in the database.
4Select
Collate
to assemble multiple printed copies in the proper
sequence.
This option is only available if your form has more than one
page and your printer supports collating.
5 Enter offset measurements under
Print offsets for data
if you
wish
.
This is useful if you want to position data in a specific place on
the page. This option is only available if
Data Only
is selected in
the
Form/Data
drop-down list.
6Select
Use macro to print form
if you have a macro programming
utility installed and want to print a stored print file. This option
is only available if you have set a macro number.
See “Printing Your Form as a Macro” on page 4-10 for
information.
7 Select any other print options you want.
8 Click
OK.
OmniForm prints your form with the selected settings.
The Print to File dialog box appears after you click
OK
if you
have selected the
Print to file
option in the Print dialog box.
Select a location for the file, type a file name in the
File name
text
box, and click
OK.
Importing an Existing Electronic Form
Using the print to OmniForm driver, you can print an electronic form
(created from any application) to OmniForm. OmniForm adds this
driver as a printer to the Windows Printer Group during installation. If
you do not have this feature, reinstall OmniForm and make sure that the
Print to OmniForm Support
option is selected in the Additional
Components dialog box. Then, follow these instructions:
To print your Form to OmniForm
1 Open the form in the application in which it was created.
Remove any colored or shaded background from the form.
2 Choose
Print
from the File menu.
To Next Page
Loading...
Need help?
General
