Objet Eden500V - Page 120

Operating & Maintaining the Eden 3-D Printer
7–44 DOC-00500 Rev. F
Test Interface TheBuiltInTestsscreenlistspre‐configuredtests,groupedbycomponent
categories.Inthisscreen,youselectandruntests,andtheresultsare
displayed.
Figure 7-2: Built In Tests screen
Test List TestName
Thiscolumnlistsallofthetests,togetherwithselectioncheckboxes.
Clickthecheckboxestoselectthetestsyouwanttorun.Toremovea
selection,clickthecheckboxagain.Toquicklyselectallofthetestsina
componentcategory,usetheGrouppull‐downmenuat
thebottomofthe
screen.
Group
Thiscolumnshowsthecomponentcategoriesforeachtest.
ThistellsyouwhichtestsarerunwhenselectingacategoryfromtheGroup
pull‐downmenuatthebottomofthescreen.
Status
Thiscolumnshowsthestatusofeachtestafteryourunit:
Testsuccessfullycompleted.
Testfailed.(Double‐clickonafailedtest’slinetoreviewthefailure
details.)
Unknownresults.(Thetesthasnotbeenrunyet.)