Objet Eden500V - Page 121

DOC-00500 Rev. F 7–45
Eden500V/350V/350 User Guide
Test Selection Area IntheTestSelectionarea,atthebottomofthescreen,youcanquicklyselect
orde‐selecttestsbytheircharacteristics:
Running Tests
To run the selected tests:
¾
ClicktheRunbutton.
Test Results
To display the detailed results of any single test:
¾
Double‐clickthenameofthetestinthelist.
Theresultsaredisplayedinaseparatewindow.
To save and view a report of all of the tests:
¾
UsetheSaveandViewcommandbuttons(seebelow).
Command Buttons Youclickthecommandbuttons,ontherightsideofthescreen,toperform
thefollowingoperations:
Run
Clicktoruntheselectedtests.
Reset
Clicktoclearpreviouslyruntests.Thisreturnsthestatusofeachtestto
Unknown(?).
Save
Clicktosaveareportthatsummarizesthetestsrun.Thereportissavedas
anHTMLfile.Youcansaveanynumberofreportsforthetestsyourun;the
nameofthefilesavedis
BITReport [date][time].htm.Bydefault,thesefiles
aresavedintheEdeninstallationfolder,butyoucansaveitinanyother
folder.
View
Clicktodisplaythelatesttestreportthatyousaved.(Youcanviewother
testreportsbyopeningtherelevantfilesinyourWebbrowser.Todoso,
openWindowsExplorer,anddoubleclicktheBITReportfile.
Close
ClicktoclosetheBuilt‐inTestsscreen.
All
Clicktosel ectallofthetestsinthelist.
None
Clicktode‐selectallofthetestsinthelist.
Unknown
Clicktosel ectalltestthathavenotbeenrunyet(Status = ?).
Group
Usethismenutoselecttestsbycomponentcategory.
Selection
Set
Usethismenutoselectapre‐configuredsetofteststorunat
specifiedtimes(computerstartup,beforeprinting,etc.).