Oceanic OC1 - Free Menu; Countdown Timer

132
FREE MENU
M (< 2 sec) - to access Menu, while viewing Surface Main.
A (< 2 sec) - to step down (forward) through selections.
M (< 2 sec) - to step up (backward) through selections.
S (< 2 sec) - to access selection indicated by Arrow icon ( > ).
M (2 sec) any time - to revert to Surface Main.
2 min (no button action) - will revert to Surface Main.
CDT (Countdown Timer) STATUS
Upon access, the following is displayed (Fig. 127A) -
> Graphics CD TMR solid with OFF (or ON) flashing.
> Countdown Time (hr:min). If OFF, 0:00 or the CDT time if
previously set. If ON, the remaining time (min:sec).
• A < 2 sec to step through selections OFF, ON, and SET.
• S < 2 sec to save the selection that is flashing.
>> If OFF is selected, operation reverts to the Menu.
>> If ON is selected, operation reverts to the Menu with the
time set starting to countdown.
>> If SET is selected (Fig. 127B), Set CDT is accessed.
Fig.127B-CDTSTATUS
(toaccessSet,orset/ready)
Fig.127A-CDTSTATUS
(uponaccess)