Oceanic OC1 - Set Date

40
Set Date, information includes (Fig. 23):
The sequence for setting date is Year, then Month, then Day,
regardless of the Date Format set.
> Graphic DATE
> Graphics YEAR MNTH.DAY (or (DAY.MNTH)
> Date with Year digits flashing
• A (hold) to scroll upward through Year Set Points at a rate
of 8 per second from 2008 to 2051, in increments of 1
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time
• S (< 2 sec) to save the Year Set Point and flash the Month
digits
• A (hold) to scroll upward through Month Set Points at a rate
of 8 per second from 1 to 12 in increments of 1
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time
• S (< 2 sec) to save the Month Set Point and flash the Day
digits
• A (hold) to scroll upward through Day Set Points at a rate of
8 per second from 1 to 31 (max) in increments of 1
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time
• S (< 2 sec) to save the Date Set Point and revert to the Set
Time Menu.
Fig.23-SETDATE
Dayoftheweekisset
automaticallybasedonthe
Dateset.