Oceanic OC1 - Set Safety Stop

67
Arrow ( > ) icon next to the one previously saved flashing
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time
• S (< 2 sec) to save the Stop Time setting and display the Set
Safety Stop Depth screen
Set Safety Stop Depth, information includes (Fig. 51B):
> Stop Depth Set Point graphics 10 FT, 15 FT, and 20 FT (or
3 M, 4 M, 5 M, and 6 M); Arrow ( > ) icon next to the one
previously saved flashing
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time
• S (< 2 sec) to save the Stop Depth setting and revert to the
Set U Menu
Safety Stop, which applies only to NORM No Deco dives, is
described on page 86.
Set NDL Basis, information includes (Fig. 52):
> Graphic NDL BASIS
Fig.51A-SETSAFETY
STOPTIME
Fig.51B-SETSAFETY
STOPDEPTH