Oceanic OC1 - Set Time

39
Set Time of Day, information includes (Fig. 22):
This setting directly changes the Time of Day that is selected to
be the Watch Default Time, whether it is Main (home) Time or
Alternate (travel location) Time. The other will be changed by
the Time Differential set.
> Graphic TIME
> Time of Day (hr:min), Hour digits flashing, with graphic A
(or P) if 12 Hour Format
> Graphic ALT, if Alternate is Default Time (at travel location)
• A (hold) to scroll upward through Hour Set Points at a rate
of 8 per second from 12: A to 11: P, or 0: to 23: if 24
Hour Format, in increments of 1: (hr)
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time
• S (< 2 sec) to save the Hour Set Point and flash the Minute
digits
• A (hold) to scroll upward through Minute Set Points at a rate
of 8 per second from :00 to :59 in increments of :01 (min)
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time
• S (< 2 sec) to save the Time Set Point and revert to the Set
Time Menu.
Fig.22-SETTIME