Oceanic OC1 - Page 34

34
• A < 2 sec to step through selections OFF, ON, and SET.
• S < 2 sec to save the selection that is flashing.
>> If OFF is selected, operation reverts to the Menu.
>> If ON is selected, operation reverts to the Menu with the
time set starting to countdown.
>> If SET is selected (Fig. 12), Set CDT is accessed.
Set CDT, information includes (Fig. 13):
> Graphics SEt and CD TMR
> CDT (hr:min) with Hour digits flashing
> Time (clock) icon
• A (hold) to scroll upward through Hour Set Points at a rate
of 8 per second from 0: to 23: in increments of 1: (hr).
• A (< 2 sec) to step upward through Set Points one at a time.
• M (< 2 sec) to step back through Set Points one at a time.
• S (< 2 sec) to save the Hour Set Point and flash the Minute
digits.
• A (hold) to scroll upward through Minute Set Points at a rate
of 8 per second from :00 to :59 in increments of :01 (min).
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time.
• S (< 2 sec) to save the CDT Set Point and revert to the CDT
Status screen with SET flashing (similar to Fig. 12).
Fig.12-CDTSTATUS
(toaccessSet,orset/ready)
Fig.13-SETCDT