Oceanic OC1 - Page 37

37
• S < 2 sec to save the selection that is flashing.
>> If OFF is selected, operation reverts to the Menu.
>> If ON is selected, operation reverts to the Menu with the
Alarm enabled.
>> If SET is selected (Fig. 18), Set Daily Alarm is accessed.
Set Daily Alarm, information includes (Fig. 19):
> Graphics SEt and DAILY AL
> Alarm Time (hr:min) with Hour digits flashing
> Time (clock) and Alarm (speaker) icons
• A (hold) to scroll upward through Hour Set Points at a rate
of 8 per second from 0: to 23: in increments of 1: (hr).
• A (< 2 sec) to step upward through Set Points one at a time.
• M (< 2 sec) to step back through Set Points one at a time.
• S (< 2 sec) to save the Hour Set Point and flash the Minute
digits.
• A (hold) to scroll upward through Minute Set Points at a rate
of 8 per second from :00 to :59 in increments of :01 (min).
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time.
• S (< 2 sec) to save the Set Point and revert to the Daily
Alarm Status screen with SET flashing (similar to Fig. 18).
Fig.19-SETALARMTIME
Fig.18-DAILYALSTATUS
(toaccessSetorset/ready)