Oceanic OC1 - Page 51

51
from a dive, counting down from 23:50 (max) to 0:00 (hr:min).
When the Dsat count down reaches 0:00, which will generally
occur prior to the Fly count down reaching 0:00, it will remain
on the display until the Fly count down reaches 0:00.
> Dsat is not displayed after a Gauge or Violation dive.
> Desaturation requiring Times greater than 24 hours will
display 23: - - .
> In the event that Time to Desaturate still remains at the end
of 24 hours, the added time will be zeroed.
> When other screens are accessed, the Fly and Sat
countdowns continue in the background.
Fly/Dsat, information includes (Fig. 30A/B):
> Time to Fly (hr:min), 0:00 if no dive yet, with graphic FLY
> Time to Desat (hr:min), 0:00 if no dive yet, with graphic
DSAT
> Time (clock) icon
• S < 2 sec, revert to Menu
• L (on closure) to activate Backlight
Fig.30A-FLY/SAT
(10minafterdive)
Fig.30B-FLY/SAT
(<10minafterdive)