Oceanic OC1 - Page 76

76
Fig.64C-TMTNOT
REPORTING
> Tank Pressure with PSI (or BAR) and Link icons, if the TMT is
active and reporting
This screen appears when the TMT is set for use to check Bud-
dy Pressure, in which case TMT Battery status is not checked.
TMT Status (not reporting), information includes (Fig. 64C):
> Graphic TMT1 (or 2 or 3), or BUD1 (or 2)
> Graphic NOT AVAIL
This screen appears when the OC1's receiver is not receiving
a signal from a TMT, or the TMT is set Off.
Fig.64B-BUDSTATUS
Read and understand the Oceanic Personal Dive
Computer Safety and Reference Manual.