1 - 19
Chapter 1 Troubleshooting
116 398 IPP S/W Fail
The serious error of IPP is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
116 399 JME S/W Fail
The serious error of JME is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
116 701 -
Duplex printing is not available due to lack of memory.
Add memory.
If HDD doesn’ t exist, install HDD.
116 703 PS Interpret Error
An error is caused to PostScript (option).
Check the print data or spool setting.
116 710
HP-GL Spool File
Overflow
Correct document size is not judged because the received data is over
the spool size of HP-GL and HP-GL2
Add the assign of HP-GL and HP-GL2 auto layout memory, or install
HDD.
116 711
PLW form composition
error
Composing is not available because the drawing size and direction of
PLW form is different from the paper size and direction.
Select the paper which is the same size and direction as the registered
form.
116 712
Lack of PLW form
capacity
When registering PLW form and logo data, it is not available to register
due to lack of RAM or HDD.
With referring the handling manual, delete unnecessary ones after
checking the registered form and logos.
Or add memory.
116 714 HP-GL Command Error
HP-GL command error is caused.
Check the print data, delete the command to cause the error, and
execute printing again.
116 715
PLW form registration
error
When registering the form of PLW, it is not available to register due to
the limitation of the number of registration.
With referring the handling manual, delete unnecessary ones after
checking the registered form.
Or delete the unnecessary forms by the print command.
116 718
PLW form composition
error
The specified form is not registered.
Use the registered form, or register the required form.
116 720 PCL Memory Low
Lack of PCL memoryThe unnecessary port is not started.
Or adjust buffer memory size.
When it is not recovered yet, add memory.
116 737
Lack of ART user
definition
When registering the data of user definition (external character fonts,
patterns, and so on) by ART, registering is not available due to lack of
RAM capacity.
Delete it after checking the registered user definition data.
Or add memory size.
116 738 Form composition error
Composing is not available because the drawing size and direction of
form is different from the paper size and direction.
Select the paper which is the same size and direction as the registered
form.
116 739
Lack of form and logo
capacity
When registering PLW form and logo data, it is not available to register
due to lack of RAM or HDD.
With referring the handling manual, delete unnecessary ones after
checking the registered form and logos.
Or add memory.
116 740 Numeric error
Numeric is over the limited value in interpreter.
Delete the data because the value over the limit is used in printing
data.
Chain Link Fault Items Conditions of detect/Methods of treatment Ref FIP
To Next Page
Loading...
