1 - 20
Chapter 1 Troubleshooting
116 741 Form registration error
When registering the form, it is not available to register due to the
limitation of the number of registration.
With referring the handling manual, delete unnecessary ones after
checking the registered form.
Or delete the unnecessary forms by the print command.
116 742 Logo registration error
When registering the logo data, it is not available to register due to the
limitation of the number of registration.
With referring the handling manual, delete unnecessary ones after
checking the registered logo.
Or delete the unnecessary logos by the print command.
116 743 Form/Logo size over flow
The received data (form /logo) is over te registered buffer size.
With referring the handling manual, add the memory size of form
registration area in the memory setting.
Or install HDD.
116 745 ART Command Error
An error is caused to ART command.
Check the print data, delete the command to cause the error, and
execute printing again.
116 746 Form composition error
The specified form is not registered.
Use the registered form, or register the required form.
Chain Link Fault Items Conditions of detect/Methods of treatment Ref FIP
To Next Page
Loading...
