Oki B721 Maintenance Manual

Oki Data CONFIDENTIAL
45487001TH Rev.1
4-19 /
4. Maintenance menus
Item Settings Functions
Admin
Setup
Others
Setup
Security
Setup
Make
Secure
HDD
Execute Enables the encryption function for data
stored in HDD.
Generates a cipher key and makes the
encryption function (security mode)
information available. In addition, formats
HDD.
Make
Normal
HDD
Execute Disables the encryption function for data
stored in HDD.
Deletes the cipher key and makes the
encryption function (security mode)
information not available. In addition,
formats HDD.
Reset
Cipher
Key
Execute Resets a cipher key to be used in an
encrypted hard disk.
When this processing is done, all of data
stored in the HDD cannot be restored.
Language
Setup
Language
Initialize
Execute Initialize the message file loaded in
FLASH.
Job
Cancel
Setup
Cancel
Key
Behavior
Short
Long
Off
Specify the behavior when Cancel button
is pressed in printing.
Short: Cancel the current job by pressing
Cancel button below 2 seconds.
Long: Cancel the current job by pressing
Cancel button in 2 - 5 seconds.
Off: Ingore the press of Cancel button. The
printing can not be cancelled by pressing
cancel button.
Inquiry
Display
On
Off
Specify whether the Job Cancel selection
request will be displayed.
On: Display when Job Cancelling.
Off: Do not displasy.
Focus
Position
Ye s
No
Specify the default selection of Job Cancel
request.
Display
Timeout
60
~
180
~
300
Specify the timeout of Job Cancel
selection request. When the time passed,
the printing will be continued as Job
Cancel = No.
Item Settings Functions
Admin Setup Settings Reset
Settings
Execute Resets a part of user menu to the factory
default.
Save
Settings
Execute Saves menus currently set.
With this function, the menus with which
operation was last performed are saved,
and overwrites with them menus that were
previously saved.
Restore
Settings
Execute Changes to the menu setting saved.
[Conditions for display]
The menu settings are saved.
Change
Password
New
Password
************ Sets a new password to enter "Admin
Setup" menu
From 6 to 12 digits of number or Roman
character can be enter.
Verify
Password
************ Makes User input the new password to
enter "Admin Setup" menu which is set by
"New Password" for confirmation.
From 6 to 12 digits of number or Roman
character can be enter.
*L: The default value for destinations that accept Letter as default.
*A: The default value for destinations that accept A4 as default.

Oki B721 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Processor	533 MHz
Memory	256 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard