Oki B721 Maintenance Manual

45487001TH Rev.1
2-9 /
Oki Data CONFIDENTIAL
2. Installation
SetthepaperinMPtray.
Note! • Donotloadpaperofdifferentsizes,types,orweightsatthesametime.
 • Whenaddingpaper,removethepaperontheMPTrayandstraightenthe
edges of both stacks of paper, and then load them again.
 • DonotputanythingotherthanpaperforprintingintheMPTray.
Preparation before setting envelopes in the MP Tray.
BeforesettingenvelopesintheMPTray,performthefollowingprocedure.
(1) Insertyourngerintotherecessontherightsideoftheprinterandpullthefront
coveropenlevertoopenthefrontcoverforward.
Front cover
Front cover open lever
Top cover
(3) Tiltthepaperjamreleaseleverofthefuserunitbacktotheenvelopeposition.
Possible to get burned.
Donottouchthefuserunit.Itishot.
(2) Openthetopcover. (4) Closethetopcover.
Paper jam release lever

Oki B721 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Processor	533 MHz
Memory	256 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard