Oki B721 Maintenance Manual

Oki Data CONFIDENTIAL
45487001TH Rev.1
4-7 /
4. Maintenance menus
Item Settings Functions
Menus Print
Adjust
Darkness 0
+1
+2
-2
-1
Sets print darkness.
SMR Setting
0
+1
+2
+3
-3
-2
-1
To correct variations in print results
caused by temperature/humility conditions
and difference in print density/frequency.
Change the setting when print quality is
uneven.
BG Setting
0
+1
+2
+3
-3
-2
-1
To correct variations in print results
caused by temperature/humility conditions
and difference in print density/frequency.
Change the setting when background is
dark.
Drum Cleaning
On
Off
Sets whether to rotate the drum in
idle prior to printing in order to reduce
horizontal white lines. Be warned that
this will shorten the ID life as much as this
rotation.
High Humid Mode
On
Off
Sets On or Off for the curl reduction mode.
Quiet Mode
On
Off
Sets Off/On of the quiet printing mode.
Admin Setup Enter Password ************ Enters a password to enter Admin Setup
menu.
The default value is "aaaaaa."
From 6 to 12 digits of numbers or Roman
character to input.
Network
setup
TCP/IP Enable
Disable
Sets Enable/Disable of TCP/IP Protocol.
Item Settings Functions
Admin Setup Network
setup
IP Version IP v4
IP v4+v6
IP v6
Set up the IP version.
There is only IPv4 and IPv4+v6 as normal
value.
From this stage, If IPv6 only is set from
UI, for example Telnet, "IPv6" appears as
the value of IP VERSION on the operation
panel. "IPv6" will disapears from the value
if "IP v4","IP v4+v6" is selected.
[Conditions for display]
"TCP/IP"should be ENABLE
NetBIOS
over TCP
Enable
Disable
Sets Enable/Disable of NetBIOS over TCP
Protocol.
[Condition for display]
"Enable" is selected for "TCP/IP" and also
"IP Version" is not IP v6.
IP Address
Set
Auto
Manual
Sets the IP address setting method.
[Conditions for display]
"Enable" is selected in "TCP/IP."
IPv4
Address
xxx.xxx.xxx.
xxx
Sets the IP address.
[Condition for display]
"Enable" is selected for "TCP/IP" and also
"IP Version" is not IP v6.
Subnet
Mask
xxx.xxx.xxx.
xxx
Sets the subnet mask.
[Conditions for display]
"Enable" is selected in "TCP/IP."
Gateway
Address
xxx.xxx.xxx.
xxx
Sets the Gateway (default router) address.
0.0.0.0 means that there is no router.
[Conditions for display]
"Enable" is selected in "TCP/IP."
Web Enable
Disable
Sets Enable/Disable of Web.
[Conditions for display]
"Enable" is selected in "TCP/IP."
Teln e t Enable
Disable
Sets Enable/Disable of Telnet.
[Conditions for display]
"Enable" is selected in "TCP/IP."

Oki B721 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Processor	533 MHz
Memory	256 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard