Oki C5200 User Manual

Oki Data CONFIDENTIAL
42615101TH Rev.8 184 /
Table 7-1-2 Service Call Error (5/7)
Service call
175:Error
Service call
176:Error
177:Error
Service call
181:Error
182:Error
Power off/on
190:Error
Service call
200:Error
~
202:Error
Power off/on
209:Download Error
Power off/on
203:Error
204:Error
207:Error
208:Error
210:Error
~
214:Error
F0C:Error
F0D:Error
(C5400 only)
FFE:Error(C5400 only)
FFF:Error
Service call
220:Error
Does error reoccur?
Does error reoccur?
Does error reoccur?
Does error reoccur?
Error occurered while writing
over the PU firmware.
Downloading Media Table to PU
has failure.(Related to Custom
Media Type)
Reinstall the CU board.
Is the error message displayed
again?
Take off the HDD or replaced?
Turn power ON again.
Replace fuser unit.
Turn power ON again.
Replace fuser unit.
Turn power ON again.
After checking connec-
tion parts of connector,
replace option unit.
Turn power ON again.
Add option RAM DIMM.
Turn the printer OFF/
ON, and retry to
download the PU
firmware again. (Usu-
ally, the procedure (PU
firmware download)
which isn’t done, so
this is not occur.)
Turn the printer OFF/
ON, and retry to
download the PU
firmware, again.
(Usually, the procedure
isn’t done, so this is not
occur.)
After turn power OFF,
check connections
between CU board and
PU board. Then turn
power ON again.
Reset original HDD.
Open of back up
roller thermistor
detected (at low
temperature).
Abnormal (high)
temperature of
back up roller
thermistor
detected.
Option unit I/F
error. (181 =
Duplex Unit, 182
= Option Tray)
System Memory
Overflow.
PU Firmware
download Error.
Media Table
download Error.
An error was
detected of the
CU program.
(203~214 is not
occure in usual
operating.)
False setting of a
record medium
detected by a
print statistics.
Ye s
Ye s
Ye s
Ye s
Ye s
Error DescriptionMessage Cause Solution

Oki C5200 Specifications

General

Brand	Oki
Model	C5200
Category	All in One Printer
Language	English