Olympus E-M1X - Page 156

K 2-10 Drive Mode (j/Y/i)
4 Highlight [j/j], [♥j], or [J] using the FG
buttons and press the I button.
• The camera will display options for the selected item.
5 Choose a setting for [Max fps].
• Highlight [Max fps] using the FG buttons and press the
I button.
• Highlight an option using the FG buttons and press the
OK button.
6 Choose a setting for [Pre-shutter Frames].
• This option will only be available if you selected [J] in
Step 4.
• Highlight [Pre-shutter Frames] using the FG buttons
and press the I button.
• Highlight an option using the FG buttons and press the
OK button.
• To disable pre-capture, select [0].
7 Choose the maximum number of shots per burst
([Frame Count Limiter]).
• Highlight [Frame Count Limiter] using the FG buttons
and press the I button.
• To keep shooting as long as the shutter release button is
pressed all the way down, select [Off].
• To choose a maximum number of shots, highlight
the current setting and press the I button to display
options. Highlight digits using the HI buttons and use
the FG buttons to change.
• The maximum number of shots per burst includes shots
captured while the shutter button is pressed halfway.
g “Reducing Shutter Lag (Pro Capture Photography)”
(P. 168)
• Press the OK button to save changes to settings.
8 Press the OK button.
• G Custom Menu N will be displayed.
9 Press the MENU button repeatedly to exit the
menus.
• For information on taking photos in Pro Capture modes, see page 168.
156 EN
2