n 3-7 Focus
Access via Live Controls
Face priority AF options can also be accessed by
highlighting [I Face Priority] in the live controls and
selecting an option using HI on the arrow pad.
• You can also select face priority by rotating the rear dial in the
AF-target selection display.
I face priority
Menu Access
Use [I Face Priority] in G Custom Menu L.
MENU button G tab L tab [I Face Priority] Press I on the arrow pad to view
options Use the FG buttons to choose an option
%
These settings can also be accessed using the following methods.
• Highlight [AF Area] in the LV super control panel and press the OK button. You can then
adjust settings by rotating the rear dial.
• Access the AF-target display by pressing the control to which [N] has been assigned
via [n Button Function]. You can then adjust settings by rotating the rear dial. At default
settings, [N] is assigned to the Fn button.
Using Face Priority AF
1 Point the camera at your subject.
• Faces detected by the camera are indicated by white
borders.
• A white border is also displayed if a face is detected
during manual focus. Exposure will be set according to
the value metered for the center of the face.
M-ISM-IS
1
1:02:03
n
LL
R
R
250 F5.6
123
min
1
C-AF
0.0
30
p
30
p
4K
TC 00:00:00:00 DF
ISO-A
200
2 Press the R (movie) button to start recording.
• The camera may fail to detect some subjects.
• The white border is not displayed during recording.
• The camera may be unable to detect the subject depending on the settings selected for the
[Picture Mode] art fi lter options (ART1–ART16).
• If the zoom frame is displayed, the camera will focus on the subject in the zoom frame.
361
EN
3
To Next Page
Loading...
