n 3-10 Effects
Filming at a Higher Zoom Ratio
(Digital Tele-converter)
This option takes a crop at the center of the frame the same dimensions as the
size option currently selected for image quality and zooms it in to fi ll the display.
The zoom ratio increases by about 2×. This allows you to zoom in past the lens’
maximum focal length, making it a good choice when you are unable to switch
lenses or fi nd it diffi cult to get any closer to your subject.
• [Digital Tele-converter] cannot be combined with [Movie H] (P. 409).
• The digital teleconverter cannot be turned on or off while movie recording is in progress.
1 Press the MENU button to display the menus.
2 Highlight [Digital Tele-converter] in W Shooting
Menu 1 and press I on the arrow pad.
3 Highlight [On] using the FG buttons and press the
OK button.
• When [On] is selected, the display in the monitor is
zoomed in by 2× and H appears in the display. Movies
are recorded at this zoom ratio.
Digital teleconverter
M-ISM-IS
1
1:02:03
n
LL
R
R
123
min
1
30
p
30
p
4K
C-AF
TC 00:00:00:00 DF
0.0
250 F5.6
ISO-A
200
4 Press the MENU button repeatedly to exit the
menus.
%
• [Digital Tele-converter] can be assigned to a camera control using [n Button/Dial/Lever] >
[n Button Function] (P. 417) in the n video menu, allowing you to turn it on or off and the
touch of a button.
411
EN
3